Description
Submersible Bilge Pump 500 GPH 12 volt DC
- Connections:ย For 19mm (3/4″) or 25mm (1″) bore hose on inlet and outlet. Straight or 90ยบ Elbow
- Dimensions:ย 112mm high, 130mm long, 73mm wide.
- Fuse Size:ย 4(amp)
- Output:ย Up to 31 litres/minute (7 gallons/minute). Max. recommended discharge head 2m.
- Fully automated bilge pump with integral sensor.
- Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode.
- Compact pump for smaller vessels.
- Tough plastic body.
- Back flow prevention to reduce the amount of water left over in the bilge,
- Air Vents in the body to help prevent air locks in challenging installations.
- Quick release inlet strainer allows rapid cleaning.
- Low amp draw conserves batteries.
- Ignition protected and built in thermal cut-off.
Check out Bilge Pump Switch with High Water Alarm.
